COPY/PASTE DAY
To speed up the programming sequence you can copy
one day into another, or several other, days.
1. Press
Set
x2
to enter copy mode.
2. Choose the ‘Copy’ day using
▲
and press
Ok
.
3. Choose the ‘Paste’ day using
▲
and press
Ok
.
4. Repeat step as required for further ‘Paste’ days
At any point Press
Ok
x2 to return to Run Mode
RESET UNIT
To erase all current setti ngs and return to it’s factory
default setti ngs & programs.
1. Press and hold
Ok
and
▼
for 6 seconds.
2. When Reset is displayed push in the
Reset
butt on.
3. All segments on the display are shown to confi rm
reset has taken place.
PROGRAMMING
Within programming mode the thermostat will return
to normal operati on if no butt ons are pressed for 30
seconds.
To exit programming mode either wait 30 seconds or
press
Set
x2 and
Ok
.
NB: Each day’s end ti me is 11:59 in 12hr or 23:59 in 24hr
formats. P6 should never be set for midnight as this will
cause an error in programming.
Each day of the week can be programmed separately,
starti ng with Monday (Mo)
1. Press
Set
to enter programming mode.
2. Set Mo MORN temperature using
▼▲
and press
Ok
.
3. Set Mo MORN ti me using
▼▲
and press
Ok
.
4. Set Mo DAY temperature using
▼▲
and press
Ok
.
5. Set Mo DAY ti me using
▼▲
and press
Ok
.
6. Repeat procedure for all 6 set points in the day and
conti nue on to program each day of the week.
At any point Press
Set x2
then
Ok
to return to Run Mode
MORN
DAY
Noon Break
EVEN
NIGHT
NIGHT
CUSTOM PROGRAM cont...
Below shows the programming segments of the default program on a Weekday.
Held over from previous
day’s setting
.
Essenti ally, if the thermostat reads the temperature below the chosen temperature it will
send a message for the boiler to fi re and your heati ng to come on.
The above diagram shows how the day is split up into named parts but BOTH the ti mes
and temperatures are changeable. Using the programming instructi ons that follow you
can set the ti me each part starts and the temperature it will set to at that point. As can be
seen the NIGHT setti ng carries over & stays unti l the MORN ti me the following day.
If you don’t need a certain program to be there, for example you do not require Noon as
no one is home at that ti me of the day, then you simply set that program for the same
temperature as the one before - as it cannot be deleted. There must be 6 programmed
events each day even if they are set to the same temperature.
Mo - Fr
Time
°C
1: MORN
2: DAY
3: Noon
4: Break
5: EVEN
6: NIGHT
Sa - Su
Time
°C
1: MORN
2: DAY
3: Noon
4: Break
5: EVEN
6: NIGHT
CREATING YOUR PROGRAM
Use the grids below to plan out your own custom program before you start.
2am
6am
10am
2pm
6pm
10pm
6:00am 8:30am
12:00pm 2:00pm 4:30pm
10:30pm
Prog
is shown at the
top of the display
Copy Prog
is shown at
the top of the display
