49/89
USE OF THE MIST AND FAN FUNCTION
Remove the water tank, turn it over, follow the arrow to remove the cap
counterclockwise.
Add clean water to the tank.
Close the water tank cap by turning it clockwise. There is a small white sili-
cone ring that should not be loosened when you fill the water tank.
Replace the water tank on the base.
Connect the fan to the mains supply. A « beep » will be emitted to inform
you that the unit is switched on. The indicator light on the display panel will
also come on.
You can control the sprayer either via the display panel or the remote con-
trol. The remote control works with a CR2025 battery. Just remove the pro-
tective strip before use.
Press the « ON » button to start the sprayer. Note that the sprayer will be
set to the default « ON » position when the fan is set to « Low Speed »,
fixed position and « normal » mode.
After switching on the sprayer, you can choose the speed and mode you
prefer.
The table below indicates the different modes and speeds of use :
REMMTE
CONTROL
DISPLAY SCREEN
INDICATOR LIGHTS
CHARACTERISTICS
OFF
POWER
The fan is ready to
be used but has not
been switched on
yet.
