67/78
1.
The power indicator light is on when the unit is plugged in, whether
the unit is operating or not.
2.
Press the
button to turn on the device. Press again to stop
operation.
3.
Press this button
to set the desired fan speed.
4.
Press the
button to set the desired humidity level in the room,
which can be adjusted from 40 to 80 % in 5 % intervals. After a period
of operation, when the room humidity is 2% below the selected
humidity, the compressor stops and the fan stops running 3 minutes
later; when the room humidity is 2% or more below the selected
humidity, the compressor restarts after the compressor protection time
of 3 minutes has elapsed.
5.
Press the
button to program the time at which the unit turns on
and off. If you want to cancel the timer programming, press the button
to set the time to 00, and press the button again, it will scroll from 00-
01-02 to 23-24.this is the time programmed to turn on the unit. The
set time remains unchanged if the machine stops working due to a full
water tank or during defrosting.
EMPTYING THE WATER TANK
When the water tank is full, the tank full indicator light comes on, the
dehumidifier stops automatically and the buzzer emits 15 beeps to warn the
user that the water must be emptied from the tank.