The set temperature is too
high.
Reset the temperature.
The air inlet is blocked.
Clean the air inlet.
3.
The ‘Power Off’ function is
in heating mode.
When the temperature of
the air outlet is higher than
70 (??), the appliance turns
off automatically.
Switch the appliance back
on when the temperature
has fallen.
4. Noise
The appliance has been
placed on a surface that is
not flat.
Place the appliance on a flat
surface.
The noise comes from the
flow of the refrigerant in the
appliance.
This is normal.
5. E0 code
The temperature sensor
does not work.
Replace the temperature
sensor (the appliance still
works without the sensor).
6. E2 code
The water tank is full.
Empty the water tank.
The images are not contractual.
SELECTIVE COLLECTION OF ELECTRICAL AND ELECTRONIC WASTE
Electrical products should not be disposed of with household products. According to the
European Directive 2012/19/EU for the disposal of electrical and electronic equipment and
its implementation in national law, used electrical products must be collected separately
and disposed of at the collection points provided for this purpose. Contact your local
authorities or dealer for recycling advice.
WARRANTY TERMS AND CONDITIONS
This product is guaranteed for a fixed period of time with the distributor from the date of
purchase against any failure resulting from a manufacturing or material defect. This
warranty does not cover defects or damage resulting from improper installation, improper
use or abnormal wear and tear of the product.
The device must be returned in its original packaging and with the receipt, subject to
proper handling. Therefore, observe the operating instructions and safety instructions
