background image

                                                             TPMS1209C01 User Manual 

Page 2 of 23 

I. S&T TPMS1209C01 Full-Time Direct TPMS 

TPMS1209C01 is a full-time direct tire pressure monitoring system including one wireless Monitor and 

four screw-on Transmitters. The system can also support monitoring of the spare tire and a two-tire trailer 

if needed. But this requires purchase of extra replacement transmitter. The Transmitters can be screwed 

onto the tire valve to replace the original valve cap to sense the pressure inside the tire all the time, and 

transmit the pressure information data to the Monitor by RF technology.   

The Monitor receives the data and displays the pressure on the screen. The Monitor will issue different 

alarms if the tire pressure is over or under an improper state based on the standard pressure. 

S&T TPMS1209C01

 

will sense and display the tire pressure and temperature all the time and can issue an 

alarm when the tire pressure or temperature is at an improper level, so as to notify the driver to treat the 

problem and prevent tire damage. With the TPMS1209C01, the driver can monitor the pressure and 

temperature to avoid excess gasoline consumption and keep the vehicle at the proper pressure. 

----------------------------------------------------------------------------------------- 

II. Parts of S&T TPMS1209C03 

Monitor   

 

 

 

 

 

 

 

 

 

Transmitter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TPMS1209C01 Parts 

1 Monitor 

4 Transmitters 

4 Security Locks 

1 Lighter Plug 

4 Counterweights (each 10g) 

2 Wrenches 

1 User Manual 

1 Warranty Card 

 

 

 

 

 

Summary of Contents for TPMS1209C01
























Reviews: