KBox A-150-SKL - User Guide Rev. 1.1
// 31
5.
Carefully slide the front panel-SBC assembly out of the main chassis while taking care not to damage the SBC
and internal components. When removing the front panel-SBC assembly ensure that internal cables do not catch
on internal components.
Figure 14: Removing the Front panel- SBC Assembly
1
Front panel with side screw removed
2
Front panel- SBC assembly slides out of the main
chassis
3
Main chassis with side screw removed
6.
Place the front panel- SBC assembly on an ESD-safe surface.
7.
Close the system, by proceeding in the reverse order. Align the front panel- SBC assembly with the open chassis.
Carefully slide the front panel- SBC assembly towards the rear side of the chassis, while taking care that the
internal cables have space and do not catch on or damage internal components. Secure using the screws
retained in step 3 and 4.
1
2
3
