19
Tuning in a Station
1. Turn the SOURCE dial on the unit or repeatedly press the FM/DAB button on the
remote control to select the tuner source.
2. Select a station using one of the following methods.
• Auto Tuning
Press and hold the
/
buttons for one second or more, the frequency changes
down or up automatically until a station is found.
• Manual Tuning
Repeatedly press the
/
buttons to change the frequency until you find the
station you want.
• Preset Tuning (Available only after the stations are preset)
Repeatedly press the PRESET / buttons on the remote control to select the
desired preset number. Its band and frequency are displayed on the front panel.
Program radio stations
• Automatically
Press and hold the PROGRAM button on the remote control for 2 second or more to
activate automatic program mode.
• “SCANNING” is displayed.
• All available stations are programmed.
• The first programmed radio station is broadcast automatically.
• Manually
1. Tune to a radio station.
2. Press the PROGRAM button on the remote control to activate program mode.
• The preset number will blink.
3. Press the PRESET / buttons on the remote control to allocate a number to this
radio station.
4. Press the PROGRAM button on the remote control again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset
number.
FM Radio Operation
• Make sure that you have correctly connected and fully extended the antenna.
• You can program a maximum of 20 FM radio stations.
If you select more than 20, the preset number will be changed to “1” automatically.
If the system is unplugged or if a power failure occurs, the preset stations will not be
erased.
