14
ECO-Power/Standby Features
Switching ON / OFF
When you first connect the unit to the AC power, the unit will be in standby mode.
• Press the standby button to switch the unit on. The word “HELLO” will show in the
display. A countdown of 10 seconds starts for preheating of the system. Then, the
system will switch to the last selected source.
• Press the standby button to switch the unit back to standby mode. The words “BYE
BYE” will show in the display.
Switching the system to ECO Power/Standby mode
Press and hold the standby button for 2 seconds or more to switch to ECO Power Standby
or normal standby.
• ECO Power standby mode
The clock will not be displayed. Press the CLOCK button to display the clock on the LCD
display (if set).
• Normal standby mode
The clock (if set) display on the LCD display.
4. Connecting to the Mains Supply
Connect the AC~ socket on the main unit to power plug to the wall outlet with the mains
cable.
• Be sure to unplug the power plug from the wall outlet when going out or when the unit is not in use
for an extended period of time.
• Use the mains cable as the disconnect device. The disconnect device shall remain readily operable.
