37
GB
Scan Setting
By default, FM scans stop at any available station. This
may result in a poor signal-to-noise ratio (hiss) from weak
stations.
1. To change the scan settings to stop only at stations with
good signal strength, press MENU button, and then turn
SCROLL/SELECT dial to select <Scan setting>, press
SCROLL/SELECT dial to confirm.
2. Turn SCROLL/SELECT dial to browse <Strong stations
only>, and then press SCROLL/SELECT dial to confirm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For
weak stations, this may result in a poor signal-to-noise ratio
(hiss).
1. To play weak stations in mono, press MENU button,
and then turn SCROLL/SELECT dial to select <Audio
setting>, press SCROLL/SELECT dial to confirm.
2. Turn SCROLL/SELECT dial to browse <Forced mono>,
and then press SCROLL/SELECT dial to confirm.
The unit will automatically switch between stereo and
mono when <Stereo allowed> is selected depending
on the signal strength, but you can override this and
switch this function manually. This is helpful when
receiving poor signal reception.
SJUPBL_RE_BU_WH14E IB 170712_will.indb 37
12/7/2017 3:06 PM
