background image

6

Batteries
•  Batteries used in the remote control for this 

unit are easily swallowed by young children 

and this is dangerous.

•  Keep loose batteries away from young 

children and make sure that the battery 

holder tray is secure in the remote control. 

Seek medical advice if you believe a cell 

has been swallowed.

•  Please dispose of batteries correctly by 

following the guidance in this manual.

Supervision
•  Children should be supervised to ensure 

that they do not play with the unit and the 

remote control.

•  Never let anyone especially children push 

anything into the holes, slots or any other 

openings in the case - this could result in a 

fatal electric shock.

Class 1 Laser Product
•  This unit utilises a 

laser. Use of controls, 

adjustments or 

performance of 

procedures other than those specified 

herein may result in hazardous radiation 

exposure.

•  Before moving the unit, ensure the disc 

tray is empty.

•  Always remove the disc when the unit is 

not in use.

•  Failure to do so will risk severely damaging 

the disc and the unit.

•  Do not stack devices, heat from other 

devices may affect the performance of the 

unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead 

symbol, within an equilateral 

triangle, is intended to alert the 

user to the presence of uninsulated 

“dangerous voltage” within the 

unit’s enclosure that may be of 

sufficient magnitude to constitute a 

risk of electric shock.

The exclamation point within an 

equilateral triangle is intended to 

alert the user to the presence of 

important operating and 

maintenance (servicing) 

instructions in the manual 

accompanying the unit.

Service
•  To reduce the risk of electric shock, do not 

remove screws. The unit does not contain 

any user-serviceable parts. Please leave all 

maintenance work to qualified personnel.

•  Do not open any fixed covers as this may 

expose dangerous voltages.

Maintenance
•  Ensure to unplug the unit from the mains 

socket before cleaning.

•  Do not use any type of abrasive pad or 

abrasive cleaning solutions as these may 

damage the unit’s surface.

•  Do not use liquids to clean the unit.

CLASS 1 

LASER PRODUCT

Summary of Contents for SHFTPPH10

































Reviews: