22
GB
Before Use
1. Place on a stable, flat floor. If the floor surface is not even:
•
Vibration and noise will occur.
•
Water may leak from the water tank.
2. Make sure the air inlet and air outlet are clear and free from blockages.
3. Allow at least 300mm clearance space around the unit.
Your unit must stand upright for at least 2 hours prior to use.
Operation
1. Connect the unit to the mains socket. The units alarm will sound 3 times.
2. Press the
POWER
button to turn the unit on. The indicators on the control panel will
illuminate to show the currently selected functions.
3. Select the desired functions by repeatedly pressing the relevant button.
4. Press the
POWER
button to turn the unit off.
When the unit is turned off, the motor will keep running for 5﹣10 minutes. Do not unplug the unit unless
the motor has stopped as this may damage the motor.
Water Tank Full
When the water tank is full, the unit will beep 10
times. The
WATER FULL
indicator will illuminate
and the unit will automatically stop operating. Turn
off the unit and remove the water tank. Empty the
water and then refit the water tank. Turn the unit on
again and continue operation.
SDH12L13E_IB_7L_130729_Shaun.indb 22
29/07/2013 11:26 AM
Summary of Contents for SDH12L13E
Page 2: ......
