Sandstrom S7DPF10, Instruction Manual

Page: 13 / 20

GB-13
Settings
Basic Operation
Preparations
Introduction and Pr
od
uc
t O
ve
rv
ie
w
Troubleshooting and Specification
Safety Warnings
Setting Items Description
General Setup Language Set up the language of the OSD menu.
Brightness
Adjust the brightness of the screen.
The available options include: +3, +2, +1,
0, -1, -2, -3.
Contrast
Adjust the contrast of the screen.
The available options include: +3, +2, +1,
0, -1, -2, -3.
Saturation
Adjust the saturation of the screen.
The available options include: +3, +2, +1,
0, -1, -2, -3.
Auto run
Set the Digital Photo Frame to run a
specified mode automatically when you
switch on it.
Default Reset all settings to the default settings.
Setting Auto Run
You can set the Digital Photo Frame to run a specified mode automatically when you
switch it on.
1. Select the
SETUP
icon on the main menu and then press the button. The Setup
Menu appears on the screen.
2. Press the or button to select
General Setup
, and then press the button.
3. Press the or button to select
Auto run
, and then press the button
4. Press the or button to select a specified mode you like:
•
Photo:
The Digital Photo Frame will start a slideshow when you switch it on.
•
Main menu:
The Digital Photo Frame will display the main menu when you
switch it on.
5. Press the button to confirm.
6. Press and hold the button to exit.