17
Initial S
etup
GB
7.
In the
Country
menu, press the
buttons to select the country
where you will operate the TV. The default country is set as UK. Press the
OK
button to confirm.
8.
Channel tuning will commence. This operation may take up to 6 minutes.
The display will show the progress of the tuning and the number of
channels found.
9.
If you want to skip the ATV tuning, press the
MENU
button to interrupt
the tuning half way. A pop-up screen will be displayed, press the
button to select
YES
to confirm. You will then go straight to DTV tuning.
You may repeat the above step if you also want to skip the DTV tuning.
An installation reminder will appear the next time you turn on the TV.
10.
After tuning is complete, the channels are arranged in the broadcaster's
preset order. If you wish to skip channels, modify the preset order or
rename channels, select
Programme Edit
under the
Channel
menu
(refer to page 20-21 for details).
HDMI1
HDMI2
VGA
Y/Pb/Pr
A/V IN
HP
USB
Common Interface
PC
audio
OR
RF coaxial cable
(not included)
Channel Tuning
ATV
:
0 Programme(s)
DTV
:
0 Programme(s)
Radio :
0 Programme(s)
Data
:
0 Programme(s)
1 %... 482.00 MHz
(ATV)
Turning the TV On for the First Time
1.
Connect one end of the RF coaxial cable to the aerial
socket on the wall and the other end of the cable to the
RF (75Ω) socket at the bottom of your TV.
Initial Setup
Do not connect the TV to the mains supply
until you have completed all the connections.
OK
Select
Country
Rumania
Norway
Poland
Russian
Portugal
Serbia
Slovenia
Lithuanian
Latvian
Spain
Sweden
Switzerland
UK
NewZealand
United Arab Emirates
2.
Connect the mains cable to the mains socket after you have completed
all the connections.
3.
Switch on the
POWER ON/OFF
switch which is located at the bottom
under the frame. At this stage, the TV switches to standby mode. The red
LED indicator will illuminate on the front panel of the TV.
4.
In standby mode, press the
button on the bottom panel of the TV or
the
POWER
button on the remote control to turn the TV on. The red
LED indicator will turn green.
5.
The first time you turn the TV on, it will go straight into the
First Time
Installation
menu. Please ensure the aerial is plugged in and then press
the
OK
button. (If you have already installed the TV using the Quick Start
Guide, please go to the next step “
Selecting the Input Source
” on the
next page.)
6.
In the
Tune Type
menu, press the buttons to select
DTV + ATV /
DTV / ATV
. Press the button and then press the
buttons to
select the language for the On Screen Display. Press the
OK
button to
confirm.
English
Français
Magyar
Español
Hrvatski
Nederlands
Cesky
Dansk
Deutsch
Italiano
Norsk
Polski
Português
Pyccкий
Tune Type
DTV + ATV
OK
Select
E k
OFF
ON
To the mains socket
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The button on the bottom panel of the TV or the
POWER
button on the remote control is only used for switching
the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power,
please remove the mains plug from the mains socket or switch off the
POWER ON/OFF
switch.
S24LED11_IB_111014_Zell.indd 17
14/10/2011 3:36 PM
