Room
M
onit
or
A
nsw
er
M
achine
Te
xt
M
essag
ing
U
sing
Additional
Handsets
Help
GB-35
BABY MONITOR
You can use your units handset to monitor the sounds in another room.
If the sounds reach a certain level the handset will automatically dial out to a preset external number
or to another handset. When the Baby Monitor is set to On, the handset will display Baby Monitor On
and only the microphone will be active to monitor the sound levels in the room. Both the speaker and
receiver will be set to Off and the handset will not ring if there’s any incoming call.
To switch Baby Monitor On
1. Press the
Menu
, scroll the button to
Extra
then press the
Select
button.
Baby Monitor
is highlight-
ed. Press the
Select
button.
Mode
will be highlighted.
2. Press the
Select
button, scroll the button to
On
then press the
Select
button. Set to
ON
is displayed
for 2 seconds. The handset returns to idle screen and disply as
Baby Monitor On
.
To switch off
Baby Monitor
press the
Off
button.
To change the monitor level
The monitor level can be set to High or Low, the default setting is
Low
.
To increase the sensitivity of the Baby Monitor:
1. Press the
Menu
button, scroll the button to
Level
, press the
Select
button and scroll the or
button to select Low or High setting.
To set the dial out number
1. Press the
Menu
button, scroll the button to
Call
to and press the
Select
button.
2. Use the or button to select
External
or
Internal
.
External
1. Press the
Select
button and
Enter Number
: prompt will be displayed.
2. Enter the number and press the
Save
button.
Saved
will be displayed.
When
Baby Monitor
is switched on and the sound level reaches a certain level the number will be
automatically dialled.
Internal
1. Press the
Select
button and the registered handset will be listed, for example
Handset 2
.
2. Scroll the or button to select the handset the
Baby Monitor
will call if the noise levels reach a
certain level.
3. Press the
Select
button and Set to handset 2 is displayed.
NOTE
If only one handset is registered the display prompts Not available and returns to the previous screen. You must register ad-
ditional handsets before the handsets will be displayed and make Internal calls.
If the Baby Monitor is triggered to call a handset or number and the called handset is on a call, an alert tone of 3 beeps will be
heard. If the Baby Monitor is triggered continuously the alert beap will be emiitted every 5 seconds.
WARNING
This product is not intended for use as a baby safety device and is not a substitute for adult supervision.
S100DT10_100722.indd 35
7/22/10 10:35 AM
