S&P PCD80XH Installation, Operation And Maintenance Manual Download Page 7

5

7.     WARRANTY

S&P USA - S&P Canada warrant that the PCD80XH will be free from defective materials 

and workmanship for the period of (5) years from the date of original purchase. In the 

event that we find any part is defective the product will be repaired or, in the Company’s 

discretion,  replaced  without  charge  provided  that  the  product  has  been  installed  in 

accordance  with  the  enclosed  instructions  and  all  applicable  EPA  Standards  and  state  and  local 

building codes.

IF CLAIMING UNDER WARRANTY: Please return the complete product, freight paid, to your local 

authorized distributor. All returns must be accompanied by a valid Bill Of Sale. All returns must be 

clearly marked “Warranty Claim,” with an accompanying description stating the nature of the fault.

THE  FOLLOWING  WARRANTIES  DO  NO  APPLY:  Damages  from  shipping,  either  concealed  or 

visible.  Claim  must  be  filed  with  the  carrier.  Damages  resulting  from  improper  wiring  or  installation 

Damages caused by acts of nature, or resulting from improper consumer procedures such as: Improper 

Maintenance; Misuse; Negligence; Alteration; Abuse; Abnormal Use; or Accident or Incorrect Electrical 

Voltage and Current. Removal or alteration to the S&P USA - S&P Canada data plate label.

WARRANTY VALIDATION: The end user must keep a copy of the Bill of Sale to verify purchase date.

THE  ABOVE  (5)  YEAR  WARRANTY  IS  EXPRESSLY  IN  LIEU  OF  ALL  OTHER  WARRANTIES, 

EXPRESSED,  WRITTEN  OR  IMPLIED,  INCLUDING  THE  WARRANTIES  OF  MERCHANTABILITY 

AND FITNESS FOR USE. IN NO EVENT SHALL SOLER & PALAU USA - SOLER & PALAU CANADA 

BE  LIABLE  FOR  ANY  SPECIAL,  CONSEQUENTIAL,  OR  INCIDENTAL  DAMAGES,  INCLUDING 

LOSS OF PROPERTY, REVENUES, LOST PROFITS, COSTS OF REMOVAL, INSTALLATION OR 

REINSTALLATION.

Summary of Contents for PCD80XH









Reviews: