4
6. SERVICE PARTS
PART
PART NAME
Qty.
1
Grille Assembly (includes part 2)
1
2
Grille Spring
2
3
Motor Plate
1
4
Wire Panel / Harness Assembly
1
5
Motor
1
6
Blower Wheel
1
7
Hanger Bars
4
8
Housing
1
9
Wiring Plate
1
10
Damper / Duct Connector
1
11
Power Box
1
a
Screw
1
* Blower Assembly includes part 5 & 6.
Replacement Installation:
Remove the screw on motor plate
(part 3)
, then take
out the motor plate
(part 3)
from the housing
(part 8)
by pushing down the rib in the plate while pulling out
on the side of the housing. Replace the broken parts.
WARNING
Ensure that the fan is switched off from the supply
mains before replacing.
6. Install Grille
Install ceiling material to complete the ceiling
construction and cut around the fan housing.
To attach the grille assembly to the fan housing,
pinch the grille springs on the sides of the grille
assembly and position the grille into the housing
with the grille springs in the appropriate slots.
Push the grille assembly towards the ceiling to
secure.
