S&P LPD Installation, Operation And Maintenance Manual Download Page 7

6

WARRANTY:

Soler & Palau USA warrants this equipment to be free from defects in material and workmanship for five (5) years 

from date of shipment. Any units or parts which prove to be defective and are reported during the warranty period will 

be replaced at our option when returned to our factory, transportation prepaid. Deterioration or wear by heat, abrasive 

action, chemicals, improper installation or operation or lack of normal maintenance shall not constitute defects, and 

are not covered by warranty.

The motor is warranted by the motor manufacturer for one (1) year. If the motor becomes defective in the warranty 

period, it should be taken to the nearest authorized motor service station.  If this is not done, the motor manufacturer 

will not warrant the motor. Call the factory for instructions if authorized service station is not known.

Soler & Palau USA will not be responsible for any installation, removal or re-installation costs or any consequential 

damage resulting in failure to meet conditions of any warranty.

LIMITATION OF WARRANTY AND LIABILITY

This warranty does not apply to any such S&P product or parts which have failed as a result of faulty installation or 

abuse, or incorrect electrical connections or alterations, made by others, or use under abnormal operating conditions 

or misapplication of the products and parts.

Soler & Palau USA will not approve for payment any repairs made outside the factory without prior written consent of 

its Jacksonville, Florida office.

The foregoing shall constitute our sole and exclusive warranty and our sole and exclusive liability and is in lieu of 

all other warranties, whether written, oral, implied or statutory. There are no warranties which extend beyond the 

description of the page hereof.  Seller does not warrant that said goods and articles are of merchantable quality or 

that they are fit for any particular purpose. The liability of seller on any claim of any kind, including negligence, for any 

loss or damage arising out of or connected with, or resulting from the sale and purchase of the products and parts 

covered by this proposal, acknowledgement, order or from the performance or breach of any contract pertaining 

to such sale or purchase, or from the design, manufacture, sale, delivery, resale, installation, technical direction of 

installation, inspection, repair, operation or use of any products or parts covered by this proposal, acknowledgement, 

order or furnished by seller shall, in no case exceed the price allocable to the products or parts thereof which give rise 

to the claim and shall terminate one (1) year after the shipment of said products and parts.

In no event, whether as a result of breach of contract, or warranty or alleged negligence, defects, incorrect advice or 

other causes, shall seller be liable for special or consequential damages, including, but not limited to, loss of profits 

or revenue, loss of use of the equipment or any associated equipment, cost of capital, cost of substitute equipment, 

facilities or services, down time costs, or claims of customers of the purchaser for such damages. Soler & Palau USA 

neither assumes nor authorizes any persons to assume for it any other liability in connection with the sale of its fan 

products and parts. Some states do not allow the exclusion or limitation of incidental or consequential damages, so all 

of the above limitations or exclusions may not apply to you.

SAFETY ACCESSORIES WARNING:

The responsibility for providing safety accessories for equipment supplied by Soler & Palau USA is that of the 

installer and user of this equipment. Soler & Palau USA sells its equipment with and without safety accessories, and 

accordingly it can supply such safety accessories upon receipt of order.

The user, in making its determination as to the appropriate safety accessories to be installed and any warning 

notices, should consider (1) the location of the installation, (2) the accessibility of employees and other persons 

to this equipment, (3) any adjacent equipment, (4) applicable building codes, and (5) requirements of the Federal 

Occupational Safety and Health Act. Users and installers of this equipment should read “RECOMMENDED SAFETY 

PRACTICES FOR AIR MOVING DEVICES” which is published by Air Movement and Control Association, 30 West 

University Drive, Arlington Heights, Illinois 60004.

Summary of Contents for LPD








Reviews: