S&P EDM-80N, Manual

Page: 8 / 40

8
EN
equable climate as specifi ed in IEC
60721-2-1. It may also be used in other
countries.
The EDM-80N is an extractor designed
for a single phase supply, with voit-
age and frequency as indicated on the
rating plate of the unit. The units are
manufactured with double electrical
insulation (Class II) and therefore they
do not need an earth connection.
The electrical installation must include
a double pole switch with a contact
clearance of at least 3mm. The elec-
trical cable must enter the EDM-80N
through the cable entry (5). Once the
cable has been introduced proceed us-
ing the electrical wiring diagram appli-
cable to the selected model.
EDM-80 N
For these models use the following
diagrams:
Fig. 3: Switching the extractor through
the light switch.
Fig. 4: To switch the fan through an in-
dependent switch.
EDM-80 NT
These models are provided with a tim-
er. The timer allows the fan to continue
to operate for the selected period afIer
the switch has been turned off (fi g.5).
Fig.6 shows how to connect the fan
with timer utilising the same switch as
for the lighting. The timer is fi xed on 8
minutes.
USER INSTRUCTION
This appliance can
be used by children
aged from 8 years
and above and per-
sons with reduced
physical, sensory or
mental capabilities
or lack of experi-
ence and knowledge
if they have been
given supervision or
instruction concern-
ing use of the appli-
ance in a safe way
and understand the
hazards involved.
Children shall not
play with the appli-