4
Before starting, check the following points:
• Make sure that the device does not contain any foreign body.
• Make sure that all the components are attached in their original placements.
• Check the earthing connection.
• Precautions must be taken to avoid the back-fl ow of gases into the room from the open fl ue of gas or other fuel-bur-
ning appliances (for duct and partition fans).
1.3. ACCEPTANCE – STORAGE
In case of missing, non-conforming, or totally or partially damage delivered products, the purchaser must make
written reservation on the transporters receipt and confi rm them within seventy-two (72) hours by sending a recom-
mended letter to the transporter, as well as a copy to S&P. Acceptance of the unit without any reservation will deprive
the purchaser of anys.
The product must be stored in an area protected from bad weather, shock and stains due to splashing or splattering
of any kind during its transport from the supplier to the end customer and onto the worksite before installation.
1.4. WARRANTY
The unit supplied by S&P is warranted 24 months, parts only, starting from the invoicing date.
S&P agrees to replace the parts or the unit whose operation is recognized defective by our departments except for all
damages and interests or penalties such as operating losses, commercial prejudice, or other immaterial or indirect
damages.
The following are not covered by our warranty: defects resulting from an abnormal usage or a usage not conforming
to the recommendations of our manuals; faults observed as a consequence to normal wear; incidents caused by
negligence, lack of monitoring, or servicing; faults due to the incorrect installation of the devices or to bad storage
conditions before mounting.
In any case, S&P will not be responsible for transformed unit, repaired even partially.
2. TECHNICAL INFORMATION
2.1. GENERAL INFORMATION
The ALTAIR ensures optimum ventilation of a house with a maximum energy recovery. It draws air from the rooms
(bathroom(s), toilet, kitchen and wash room(s)) and supplies fresh air through the main rooms (living room, bedroom
(s), offi ce, etc ).
The fresh and extract airfl ows are separated and fi ltered. Only heat energy is transferred to the fresh fi ltered air that
is introduced. Due to the high-effi ciency heat exchanger used in the ALTAIR performance can reach 86%.
Condensation forms during the heat exchange process and is recovered in the condensate tray, which must be con-
nected to a waste water drain.
