S&P 6002, Installation, Operation And Maintenance Manual

Page: 6 / 12

T
indicates alarm 1 on due to high ambient temperature (setting 51). Useful for summer ventilation.
Default Settings
User settings are factory pre-loaded with default values to facilitate set up and can be changed at any time. Upgrading firmware will not
affect user settings.
Alarm thresholds should be set to suit local regulations. Default values for these are general guidelines only.
Changing Settings
Press
→
and
←
to move through the settings. If the keypad lock is on then enter the password first. The screen will display the setting number
0, 1, 2, etc. plus the short description (e.g. AL1 for Alarm 1 and the current setting.)
Press the
↑
or
↓
buttons to increase or decrease the setting.
To save, press
↑
and
←
buttons at the same time. The word “OK” will appear. If you do not see “OK” and the new value it is because the
buttons were not pressed simultaneously. Try again.
List of Settings Sensor A (upper socket) Settings
NO. Name Description Range Default
0 AL1 Alarm 1 threshold, activates relay 1 by sensor
1 A1Del Alarm 1 Delay on (seconds) 0-999 30
2 A1Off Alarm 1 Delay off (seconds) 0-999 20
3 AL2 Alarm 2 threshold, activates relay 2 by sensor
4 A2Del Alarm 2 Delay on (seconds) 0-999 30
5 A2Off Alarm 2 Delay off (seconds) 0-999 20
6 AL3 Alarm 3 threshold, sounder and strobe by sensor
7 A3Del Alarm 3 Delay on (seconds) 0-999 180
8 A3Off Alarm 3 Delay off (seconds) 0-999 20
9 A1Tx Alarm 1 transmit message, CAN network 0-255 1
10 A1Tx Alarm 1 transmit message, CAN network 0-255
11 A1Tx Alarm 1 transmit message, CAN network 0-255
12 A2Tx Alarm 2 transmit message, CAN network 0-255 2
13 A2Tx Alarm 2 transmit message, CAN network 0-255
14 A2Tx Alarm 2 transmit message, CAN network 0-255
15 A3Tx Alarm 3 transmit message, CAN network 0-255 3
16 A3Tx Alarm 3 transmit message, CAN network 0-255
17 A3Tx Alarm 3 transmit message, CAN network 0-255
List of Settings Sensor B (lower socket) Settings
NO. Name Description Range Default
18 AL1-B Alarm 1 threshold, activates relay 1 by sensor
19 A1Del Alarm 1 Delay on (seconds) 0-999 30
20 A1Off Alarm 1 Delay off (seconds) 0-999 20
21 AL2-B Alarm 2 threshold, activates relay 2 by sensor
22 A2Del Alarm 2 Delay on (seconds) 0-999 30
23 A2Off Alarm 2 Delay off (seconds) 0-999 20
24 AL3-B Alarm 3 threshold, sounder and strobe by sensor
25 A3Del Alarm 3 Delay on (seconds) 0-999 180
26 A3Off Alarm 3 Delay off (seconds) 0-999 20
27 A1x,A1Tx Alarm 1 transmit message, CAN network 0-255 1
28 A11Tx Alarm 1 transmit message, CAN network 0-255
29 A1Tx Alarm 1 transmit message, CAN network 0-255