S&P 6002-A, Installation, Operation And Maintenance Manual

Page: 7 / 12

5
NO. Name Description Range Default
28 A11Tx Alarm 1 transmit message, CAN network 0-255
29 A1Tx Alarm 1 transmit message, CAN network 0-255
30 A2Tx Alarm 2 transmit message, CAN network 0-255 2
31 A2Tx Alarm 2 transmit message, CAN network 0-255
32 BiTx Binary input transmit message, CAN network 0-255
33 A3Tx Alarm 3 transmit message, CAN network 0-255 0
34 A3Tx Alarm 3 transmit message, CAN network 0-255
35 A3Tx Alarm 3 transmit message, CAN network 0-255
List of General Settings
NO. Name Description Range Default
36 R1Rx Receive message to relay 1, CAN network 0-255 0
37 R2Rx Receive message to relay 2, CAN network 0-255 2
38 R3Rx Receive message to relay 3, CAN network 0-255 3
39 Adr Sensor identification address, CAN network 0-32 0
40 AnZA Adjustment for analog zero outpot (4ma or 2V) Sensor A to tweak
output of controller input errors. Accessing this output low for testing
41 AnSA Adjustment for analog span output (20ma or 10V) sensor A to tweak
output for controller input errors. Accessing this option forces output
high for testing.
42 AnZB Adjustment for analog zero output (4ma or 2V) sensor B to tweak
output for controller input errors. Accessing this option forces output
low for testing
43 AnSB Adjustment for analog span output (20ma or 10V) sensor B to tweak
output for controller input errors. Accessing this option forces output
high for testing
44 Temp Temperature delay enable off/on 0/1 0
45 Aud Local audio alarm enable on alarm 3 0/1 1
46 BAC BACnet MSTP mode select
0 = BACnet communication disabled
1 = BACnet communication enabled
2 = BACnet communication enabled and display all sensors on CAN
network 0/1/2 0
47 BMA BACnet MAC address 127 0
48 BBR BACnet baud rate
0 = 9600
1 = 19200
2 = 38400
3 = 76800 0/1/2/3 3
49 KBL Keyboard lock 0/1 0
50 TMod Temperature modify/calibrate -9/+9° C 0
51 ATHi High temperature alarm limit used for summer ventilation. Alarm 1 is
activated when temperature exceeds option disables alarms (seconds) 0-99° C 60
52 W/U Warm up delay disables alarms 0-255 60
53 BMM BACnet maximum MAC address when polling for master 0-127 127
59 FltTx Fault alarm transit message, CAN network 0-255 0
60 ADTxA Analog drive transmit message, sensor A (top) CAN network 0-255 0
61 AMinA Analog drive. Minimum percent of scale for zero output. Sensor A 0-100 0
62 AMaxA Analog drive. Maximum percent of scale for full scale output. Sensor
A 0-100 100
63 ADRxA Receive message code to control local analog output 0-255 0
64 ADTxB Analog drive transmit message, sensor B (bottom) CAN
network 0-255 0