SanDisk SSD X100
Product Manual (Released)
Rev 1.0
© 2011 SanDisk® Corporation
9
Document No. 80-11-01842
1.2
Key Features
Flash Memory used:
SanDisk 24nm 64Gb MLC ABL
Unformatted capacities
2
:
SATA 2.5”: 64GB, 128GB, 256GB, 512GB
mSATA: 32GB, 64GB, 128GB, 256GB
Form factors:
SATA 2.5” 7.0mm case, complies with SFF-8223 and SFF-8201
SATA 2.5” 9.5mm case, complies with SFF-8223 and SFF-8201
Standard mSATA form factor with a Mini-PCIe edge connector, complies to
JEDEC MO-300B standard
Interface to host:
SATA 6Gb/s (Revision 3.0) compliant
Backwards compliant to SATA 3Gb/s & SATA 1.5Gb/s
ATA 8 Command Set ACS-2
NCQ support up to queue depth = 32
SMART support
High performance
3
:
Maximum Host transfer rate:
6Gb/s
Sustained Sequential Read:
500 MB/s
Sustained Sequential Write:
430 MB/s
4K Random Write:
43,000 IOPS
4K Random Read:
76,000 IOPS
Write Latency:
65µs
Read Latency:
55µs
Low power consumption:
Typical read/write
4
:
120mW to 150mW
Slumber power mode
5
:
70mW to 100mW
2
The logical capacity of the drive conforms to the IDEMA HDD Specification. See
www.idema.org
for details. Some of
the listed capacity is used for formatting and other functions, and thus is not available for data storage. 1 megabyte
(MB) = 1 million bytes; 1 gigabyte (GB) = 1 billion bytes.
3
Performance for 256GB product on SATA 6Gb/s host, Queue Depth = 32. Based on internal testing; performance
may vary.
4
Average (typical) power while running MobileMark
TM
2007. X100 is configured with Device Initiated Power
Management (DIPM) enabled and Host Initiated Power Management (HIPM) enabled. 120mW for form factors with
input power of 3.3V ; 150mW for 2.5” standard SATA (5V).
5
With DIPM enabled. 70mW-75mW for form factors with input power of 3.3V ; 100mW for 2.5” standard SATA (5V).
