7
– Progress Meter
Displays status of the currently playing track
8
– Play/Pause
To play, resume, or pause currently playing track
9
– Track Name
Displays name of currently playing track
10
– Album Name
Displays album name of the currently playing track
11
– Artist Name
Displays artist name of the currently playing track
Li-ion Battery
The Sansa c200 player comes with a replaceable and rechargeable lithium ion
battery. Remember to fully charge the battery before using the device for the
very first time. It takes approximately 3.5 hours to fully charge the battery. The
battery can be charged through the USB port of the computer, the car adapter
(not included) USB port, or the USB-AC adapter (not included) port.
Note:
•
Some low-power USB ports may not be able to provide enough charge power.
•
The Li-ion rechargeable batteries may eventually need to be replaced as they
have limited charge cycles.
•
To purchase a replacement battery, visit your local retailer or
www.sandisk.com
Charging the battery over USB
1)
Connect the larger end of the USB cable into the dock connector of the
Sansa player
2)
Connect the smaller end of the USB cable to an available USB port on the
computer
3)
Sansa c200 display screen will say Connected
4)
To stop recharging, disconnect the cable.
Note: The computer must be on for most USB ports to charge your battery.
Charging the battery with AC power adapter
1)
Connect the larger end of the USB cable into the dock connector of the
Sansa player
2)
Connect the smaller end of the USB cable to an available USB port on the
AC-USB adapter
3)
Plug the AC-USB charger into a power source
4)
To stop recharging, disconnect the cable
How to replace the battery
1)
Press in on the tab of the battery compartment cover on the back of Sansa
c200 player to remove it
