SanDisk SD25B-100 Product Manual Download | Manualshive

Page: 2 / 69

background image

FlashDrive Product Manual © 1999 SANDISK CORPORATION

2

SanDisk

®

Corporation general policy does not recommend the use of its products in life support applications where in a

failure or malfunction of the product may directly threaten life or injury. Per SanDisk Terms and Conditions of Sale, the user
of SanDisk products in life support applications assumes all risk of such use and indemnifies SanDisk against all damages.

SanDisk FlashDrives are UL (Underwriters Laboratories) approved. They are for use only with UL approved computers or
systems. See this manual for FlashDrive installation instructions.

The information in this manual is subject to change without notice.

SanDisk Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.

All parts of the SanDisk product documentation are protected by copyright law and all rights are reserved. This
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine readable form without prior consent, in writing, from SanDisk Corporation.

SanDisk and the SanDisk logo are registered trademarks of SanDisk Corporation.

Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of
their respective companies.

© 1999 SanDisk Corporation. All rights reserved.

The SanDisk products are covered or licensed under one or more of the following U.S. Patent Nos. 5,070,032; 5,095,344;
5,168,465; 5,172,338; 5,198,380; 5,200,959; 5,268,318; 5,268,870; 5,272,669; 5,418,752; 5,602,987. Other U.S.
and foreign patents awarded and pending.

Lit. No. 80-36-00096 Rev. 1 1/99

Printed in U.S.A.

Revision History

• Preliminary versions—initial release.
• Revision 1 1/99—includes changes to pages 17 and 19.

«
1
2
3
4
...
»

Summary of Contents for SD25B-100






































































Reviews:

No comments

Related manuals for SD25B-100

Brand: WATSON Pages: 12

Cheetah 15K.7 SAS ST3300557SS

Brand: Seagate Pages: 76

StorTrends 1312-P

Brand: American Megatrends Pages: 2

XCubeDAS XD5324D

Brand: Qsan Pages: 49

Brand: Thecus Pages: 120

Brand: Y-E Data Pages: 48

Brand: Addonics Technologies Pages: 9

Brand: Frontier Pages: 6

Brand: IBM Pages: 190

Brand: Hama Pages: 8

Brand: Seagate Pages: 42

Brand: Argus Pages: 24

Brand: Husky Pages: 10

Brand: JVC Pages: 2

Brand: Symantec Pages: 69

Brand: SIRCHIE Pages: 8

Brand: ioSafe Pages: 20

Brand: Iomega Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands