Fusion ioMemory Hardware Installation Guide | Rev 80-11-71092
Fusion ioMemory ioDrive2 devices, ioCache devices, and Fusion ioMemory ioFX devices require at least:
l
A PCI-Express (PCIe) Gen2 x8 slot, with at least 4 lanes that are electrically active.
l
Clearance for a half-height, half-length PCI device.
NOTE-
3.0TB Fusion ioMemory ioDrive2 devices require A minimum of a
full-height
, half-length slot.
Fusion ioMemory ioDrive Duo devices require at least:
l
A PCIe Gen1 x8 slot or Gen2 x4 slot.
l
A minimum of a
full-height
, half-length slot.
Fusion ioMemory ioDrive2 Duo devices require at least:
l
A PCIe Gen2 x8 slot.
l
A minimum of a
full-height
, half-length slot.
ioDrive Octal devices require at least:
l
A PCIe Gen2 x16 slot
l
Room for two
full-height
, full-length devices. The ioDrive Octal device is a full-height, full-length, double-wide
device that resides in a Gen2, x16 PCIe slot. It is compliant to the PCI Express 2.0 base spec, and the 225W High
Power specification.
NOTE-
For a list of servers that are compatible with ioDrive Octal devices, visit the
ioDrive Octal Compatibility Guide
Knowledge Base article at
https://link.sandisk.com/commercialsupport
.
3.2TB MLC ioScale devices:
l
A PCIe Gen2 x8 slot, with at least 4 lanes that are electrically active..
l
A minimum of a
full-height
, half-length slot.
All other ioScale devices supported with this release:
l
A PCI-Express (PCIe) Gen2 x8 slot, with at least 4 lanes that are electrically active.
l
Clearance for a half-height, half-length PCI device.
Adequate Power for Fusion ioMemory ioDrive2 Duo devices
Products with multiple Fusion ioMemory devices, such as the Fusion ioMemory ioDrive Duo device, require more power
than products with a single Fusion ioMemory device.
6
