SSD SATA 5000 2.5"
Product Manual
Rev
0.7
© 2008 SanDisk® Corporation
14
July 2008, Document No. 80-11-01488
7.
Interface
7.1
Supported Standards
The SSD complies with the following standards:
ATA/ATAPI-7: ANSI INCITS 397-2005, AT Attachment with Packet
Interface-7.
Serial ATA Revision 2.5 Specification (Ratification Date: October 27,
2005).
7.2
Interface Connector Characteristics
Table 15: SanDisk SSD SATA 5000 2.5” Connector Characteristics
Parameter Specifications
Drive Connector
FCI, 10039651-001LF
Mating/Unmating force
The force to mate a receptacle connector
and compatible plug connector should not
exceed 45N (4.6kgf)
The unmating force should not be less than
10N (1.0kgf)
Durability
5,000 cycles
7.3
Hotplug Support
The SSD supports hotplug operation per SATA 2.5 specification.
7.4
SATA Bridge Support
The SSD supports Marvell’s Serial ATA bridge (P/N: 88SA8040).
7.5
Interface Connector Drawing
Figure 3: Interface Connector View
