Instructions for the installer, maintenance
technician and final user
Page 29 of 33
© SandenVendo Europe SpA
1
2
5.6 Assembly / Disassembly for Maintenance
Attention!
All the operations indicated in the following paragraphs (5.6.1, 5.6.2, etc.) must be carried out
by qualified personnel.
Attention!
Contact technical assistance to request further support for any difficult operations.
5.6.1 Tray Extraction / Removal
To remove the tray proceed as follows:
» Lift up the front of the tray slightly;
» Pull frontward the tray until it stops, thus
reaching the product loading position;
» Lift up the rear of the tray and pull outwards to remove it from the vending machine;
» To install a new tray follow the instruction backward;
» When you put back the tray inside of the vending machine make sure that the connection
has taken place.
