Instructions for the installer, maintenance
technician and final user
Page 21 of 33
© SandenVendo Europe SpA
4 USE AND OPERATION OF THE VENDING MACHINE
4.1 Proper Use
The distribution takes place through a distribution cycle that allows you to take only one
product for each cycle. The distribution takes place until exhaustion of the products contained
in the vending machine.
In normal operation, the vending machine goes into standby status.
By pressing the button, relative to the desired product, the dispensing cycle is activated.
Press the button for the desired product.
- the motor of the column, in which the selected product is located, rotates according to the
product to be distributed, causing the product to fall into the delivery area.
- insert your hand into the dispensing area to pick up the product.
4.1.1 Distribution capacity
Model
Selves quantity
Spiral quantity each Shelf
SVE SSP
Min 3 ~ Max 4
Max 4
The spiral size are:
Diameter Ø
Length
Step
Product quantity
Spiral LH / RH
64.5 mm
285 mm
35 mm
8
55 mm
5
40 mm
7
SandenVendo reserves the right to approve the vend of the products only after testing them.
SandenVendo is not responsible for uses and applications of the vending machine that are
not covered in the explanations in this manual.
Shelf 1
Shelf 2
Shelf 3
Shelf 4
