Sanden SN3500, Installation Manual, Page: 73 / 150

Appendix A: Post-Installation Procedures
82005-IM-K Sandel SN3500 Installation Manual Page 7-23
7.1.12 Page 12: Traffic
Configuration Field Options Comment
DATA LINK
(Software version
3.00 and above) WSI w / TX
WSI no TX SN3500 is sole display.
SN3500 is wired as receive only,
another display is connected to the
WSI receiver.
DLINK KEY
(Software version
3.00 and above) Blank by default Enter the purchased 11 character
key code to enable data link weather.
Use the BRG and MEM keys to
select the character and the MAP
and TFC keys to move the cursor.
TCAS KEY Blank by default Enter the purchased 11 character
key code to enable traffic. Use the
BRG and MEM keys to select the
character and the MAP and TFC
keys to move the cursor.
TCAS Model Collins TCAS 4000
Goodrich Skywatch HP
Goodrich TCAS791/A
Honeywell CAS-66
Honeywell CAS-67
Honeywell CAS-81
Ryan 9900BX TAS Select the appropriate model of
TCAS from the list. Press the SET
soft key (CLR button) to program.
NOTE: Users of Honeywell KTA-810
systems should configure as CAS-
66.