Sanden SN3500, Installation Manual

Page: 48 / 150

Setup Procedures
82005-IM-K Sandel SN3500 Installation Manual Page 4-1
4 Setup Procedures
4.1 General
Setup procedures for the SN3500 are described along with the Maintenance Menu
below. The Maintenance Menu is accessed and addressed through the use of
pushbuttons and the Selected Heading knob. No external connector pin
programming is required.
4.2 Accessing the Maintenance Menus
To access the Maintenance Menus perform the following operations:
A. Prior to applying power to the SN3500, depress and hold the [BRG] and the
[MEM] pushbuttons, then apply power to the unit. Continue to hold until the
first maintenance menu appears. This protocol insures that maintenance
menus cannot be called up accidentally during flight.
B. Once the Maintenance Menu is entered, press the [NEXT] or [PREV] softkeys
to cycle the MAINTENANCE MENU pages. Use the UP/DOWN arrow keys
for selections, and rotate the right knob to adjust and select. On some menus
additional soft key legends will appear as prompts.
C. Escape the maintenance menus by pressing and holding the course pointer
knob (left knob). This will allow normal operation of the unit to test the effects
of settings. Re-enter the maintenance pages pressing and holding the course
pointer knob (left knob).
D. To disable maintenance menu operation, power down and restart normally.
All configured items are stored in non-volatile memory.
4.3 Equipment/Configuration Selections
The choices of compatible equipment contained in the SN3500 menus are listed in
the Appendix. For types not listed, consult the factory.