82011-ICUG Rev G
SG102 AHRS Installation/Calibration Utility
5
5)
Right click on the SG102Install_v2_XX.exe icon and select “Create Shortcut”
from the dropdown menu.
6)
Move the shortcut icon to the PC desktop
.
5 Connecting the SG102 AHRS Maintenance Adapter
1)
Follow the instructions in the SG102 Maintenance Adapter User Guide for
installation of the USB serial port drivers if this has not been done.
2)
Ensure that the switch is in the IN (“
NORMAL
”) position before powering up the
SG102 for Installation/Calibration. The green LED in the switch will be OFF
when the USB connector is attached and the switch is in this position. The switch
must be in the correct position BEFORE the SG102 is powered up.
3)
When the SG102 power is applied all 4 SG102 LED’s will illuminate
momentarily – then the Error LED will flash until the unit goes valid..
PROPER SG102 LED INDICATIONS
SWITCH : IN POSITION
LED OFF
LED’s ALL ON MOMENTARILY.
If only POWER LED is on, recheck the
mode pushbutton switch.
