S&C Instruction Sheet 1076-510 5
Safety Precautions
DANGER
SpeedNet Cell Edge Gateways operate b9 and +60 Vdc, and they
operate around high-voltage equipment. Failure to observe the precautions
below will result in serious personal injury or death.
Some of these precautions may differ from your company’s operating procedures
and rules. Where a discrepancy exists, follow your company’s operating procedures
and rules.
1.
QUALIFIED PERSONS. Access to an SpeedNet
Cell Edge Gateway must be restricted only to
qualified persons. See the “Qualified Persons”
section on page 2.
2.
SAFETY PROCEDURES. Always follow safe
operating procedures and rules.
3.
PERSONAL PROTECTIVE EQUIPMENT. Always
use suitable protective equipment, such as rubber
gloves, rubber mats, hard hats, safety glasses, and
flash clothing, in accordance with safe operating
procedures and rules.
4.
SAFETY LABELS. Do not remove or obscure any
of the “DANGER,” “WARNING,” “CAUTION,” or
“NOTICE” labels.
5.
SAFE DISTANCE. All persons should maintain a
minimum separation of 7.9 inches (20 cm) for the
SpeedNet antenna. Disconnect the ac/dc input
power source from the SpeedNet Cell Edge
Gateway whenever configuring or repositioning the
antenna.
6.
MAINTAINING PROPER CLEARANCE. Always
maintain proper clearance from energized
components.
