S&C Instruction Sheet 662-510
11
Enclosure Doors
Complete the following steps to close and lock the doors:
STEP 1.
Lift the door holder up to allow the door to swing
closed. See Figure 6. Make sure the door holder
is placed back in the storage position to allow
the door to be fully closed. See Figure 7.
STEP 2.
Repeat Step 1 for the other door.
STEP 3.
Engage the left-door latching mechanism.
See Figure 8.
STEP 4.
The right-hand door of the unit is equipped
with the Penta-Latch Mechanism, which
latches automatically when the door is closed.
To close a door equipped with the Penta-Latch
Mechanism, place one hand at the midpoint of
the door-front near the edge and fi rmly push the
door closed. When the latch points are positively
engaged, the spring mechanism will trip to latch
the door.
STEP 5.
Insert the padlock shackle through the hole
in padlock recess and lock the padlock.
See Figure 9.
STEP 6.
Repeat Steps 1 through 5 for the doors on the
other side of the enclosure (if open).
Figure 8. The left-door latching mechanism engaged.
Figure 9. The enclosure doors padlocked.
Figure 7. The door holder placed in the storage position to allow
the door to close.
Door holder
(stored)
Figure 6. Lift the door holder to allow the door to swing closed.
