17
3.10 Using Mini GPS to Save Settings into Flash
FV series engine board module currently offers a function to refresh the firmware to
your desired setting like baud rate, updated rate or sentences output. Please
complete the setting at
Chapter 3.9
then save the setting at this page by clicking
on the
Set
. The module is only allowed the user to refresh the module
7-8 times
.
How many times remain, please see this information at the top of red box above.
Please note when the
Setting write protection
is marked, no matter how many
times left, the module won’t allow any setting of refreshing.
Test
Set the setting and check the how
many times that can refresh the
module left.
