Sana EUJ-702, User Manual, Page: 12 / 36

10
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Place the working unit into the mounting
unit, so that their holes overlap.
Put the feeding tube into the overlapped
holes of both units. The marks on the
mounting unit and feeding tube should be
aligned.
Insert the auger into the working unit.
Slide it all the way in, until its end does not
protrude from the front of the working unit.
Depending on which seeds or nuts
you are going to process, choose the
proper regulating ring. Please refer to the
instructions provided on page 8. Put the
regulating ring into the front cap.
Place the front cap onto the working unit
and turn it clockwise several times until it is
fully tightened. Do not use excessive force.
Do not use the metal pin to do this.