Sana 727 Supreme, Instruction Manual

Page: 17 / 24

Page 17
1. Don’t touch the juicer or power cord if your hands are wet. It can cause damage to the juicer or an electric shock.
2. Wait for the motor to stop before removing the drum set. The motor turns off gradually for safety. Removing the drum set before the motor stops can damage it or
cause injury.
3. Clean the juicer immediately after use. If you wait, juice residue can dry and cause the juicing parts to get stuck and difficult to disassemble. This can cause a clogged
juicing screen.
4. Wipe the main body with a lightly damp towel or soft cloth. The juicer isn’t 100% waterproof, and water entering it can cause an electrical short or shock.
5. Do not clean the juicer with hot water or subject it to high temperatures. Do not clean it with abrasive cleaners, scrubby sponges, sharp tools, or dishwashing liquid.
Do not put any parts of the juicer in the dishwasher.
6. Make sure to completely dry the juicer and parts after using. Salts can cause corrosion of the stainless steel screens.
7. Use care not to cut yourself when cleaning or removing the blade in the drum cap.
Cleaning
Precautions When Cleaning
Wash the drum set in water, and wipe the main body with a well-squeezed
damp towel.
1. Close the juice cap to prevent drips, then remove the drum by pressing the
button and turning the drum clockwise.
2. Wash the drum cap, screen, auger, and drum under running water. Use the
cleaning brush on the juicing screen.
3. Wipe the main body with a lightly damp towel or soft cloth.
4. If needed, disassemble the drum cap for deeper cleaning.
누름
정회전
역회전
작동스위치
정회전
역회전