Thermostatic Roman Tub Faucet
K987D-L-BW
- 6 -
- 3 -
T E M P E R A T U R E C A L I B R A T I O N
O P E R A T I O N
Tile Surface
4-9/10"(125mm)
Socket
Union
Nut
3-3/5"(92mm)
1/5"(5mm)
5-1/5"(133mm)
1/5"(5mm)
5-9/10"(150mm)
3-9/10"(100mm)
7-1/10"(180mm)
5-9/10"(150mm)
3-3/10"(85mm)
4-3/10"(110mm)
4-9/10"(125mm)
9-2/5"(240mm)
Please connect socket with union nut onto
supply pipe.
Then, the length between the top surface
level and the supply the level should keep
3-3/5"(92mm) 1/5"(5mm).
(Both supply line levels should be the
same level as each other.)
Installation Dimension
Rim Width
Below 3-3/10"(85mm)
3-9/10"(100mm)
4-7/10"(120mm)
5-1/2"(140mm)
Over 5-1/2"(140mm)
Between 2-3/5"(65mm) to 4-7/10"(120mm)
Between 2-3/5"(65mm) to 4-1/10"(105mm)
Between 2-3/5"(65mm) to 3-3/10"(85mm)
Between 2-3/5"(65mm)
Can not be used.
3-1/2"(90mm)
Between 2-3/5"(65mm) to 4-1/2"(115mm)
A
Spout 9-2/5"(240mm)
2-1/5"(56mm)
1/5"(5mm)
4-1/5"(106mm)
Spout 9-2/5"
(240mm)
Rim Width
A
MIN 3-1/10"
(80mm)
MIN 5-9/10"
(150mm)
Over 8-7/10"(220mm)
4-9/10"(125mm)
3-1/10"
(80mm)
Over 1-2/5"(35mm)
Supply pipe for
cold water
Supply pipe for
hot water
1/2-14 NPT
6. Assemble handles and faucet spout
To protect water going to the cracked space
of tiles, put the sealing material to the
cracked space. Then, assemble handles(12)
and spout(25), referring to the following
indication. (Excess sealing should be
removed perfectly.)
6
2
12
11
25
24
7
8
9
13
14
Sealing
1
2
3
1
2
3
Safety Lock
Button
40 Mark
40
Please follow the installation dimensions carefully.
Improper installation may result in the prevention
of water flowing directly into the tub.
4 Limit Stop Ring
1.
Remove the handle cap and screw. Please adjust the handle to 40 C.
2.
After making sure that the temperature is 40 C, remove the handle.
3.
The safety lock button should be put to the 40 C mark on the temperature
indication plate.
NOTE
1
:
Temperature indication on the temperature indication plate should be used as a
criterion point. (Even though temperature is adjusted by using the temperature
indication plate, the temperature mark does not guarantee the actual water
temperature.)
NOTE
2
:
When attaching the temperature handle to the faucet body, don’t rotate the spindle.
CAUTION!
49 degreesC (120 degreesF) is an industry standard for
maximum discharge water temperature from tub and
shower valve. This maximum temperature may vary in
your local area.
To set this maximum discharge temperature, adjust the
position of the limit stop ring.
Moving the limit stop ring counterclockwise will reduce the
maximum discharge temperature.