28
seconds until the reception is confirmed. In case that it is interfaced with any
navigational equipment, the data on time and position will be automatically
input. It is available to manually input the time when the position data and
position are decided.
If the transmission is made when it is not connected with any navigational
equipment or under the conditions where any single manual input has not
been made, it will transmit zero information. (But it transmits the ship ID)
How to receive Distress Call
If Distress Call is received on DSC, the alarm lamp of DISTRESS & OTHERS
on the operation panel will be turned on. At the same time, an alarm of “Beep,
Beep” will be output from the speaker. Press
button to stop this alarm.
The distress call message from the transmitting country is included and
displayed on LCD.
As the equipment can record and store up to 20 memories inside, the
message can be checked out again even later.
And by connecting to printer, it is available to automatically output the
message received by DSC through printer. It is also possible to print the
notified message contents that are stored in the memory.
