User manual
12
2-5 Installing antenna
GNSS Antenna’s function gets highly affected by where it is installed at. Therefore avoid any
obstacles around it, and keep 1m distance between other antennas. You must waterproof the
parts that are exposed to the outside.
1. You must turn OFF the equipment when connecting antenna. Press the KEY for 2 seconds to
shut down.
2. Antenna must be installed at a higher level if possible, and no obstacles should be around
at its level of surface. If this cannot be followed, install it where you can see the most of
the sky.
3. You must install it as far away from the wireless transmitter’s antenna. And especially avoid
an exposure to the high capacity of radar antenna’s transmitting power (install it at a
different level of surface). Also install it where the effect of VHF or UHF transmitting antenna
is minimum (the level of surface has large affect). The transmitter’s effect may cause the
damage to the antenna and its main unit.
4. The installation process for DGNSS antenna is same as GNSS antenna as above.
Summary of Contents for SGN-500
