SAMWONTECH
1th Edition of TEMP2000_Series IM : Dec. 15. 2008 Page 9 / 63
5.2 Type of Communication Command
Two types of commands are provided on TEMP2500. One is general READ/WRITE command to read and write
information on D-Register, and the other is Reference command to read self-information of TEMP2500.
▣ Reference Command
Command
Description
AMI
Displays model name and Version-Revision of TEMP2500
▣ Read/Write Command
Command
Description
RSD
Read data in consecutive D-Register in sequence (Read)
RRD
Read data in arbitrary single D-Register (Read)
WSD
Write data in consecutive D-Register in sequence (Write)
WRD
Write data in arbitrary single D-Register (Write)
STD
Register arbitrary single address to monitor (D-Register Monitoring Set)
CLD
Read data in address registered by STD command
(D-Register Monitoring Call)
☞
Each Command can read or write up to 64 D-Register and all of the SED/CLD data will be reset by power OFF,
so the data should be registered again.
