SAMWONTECH
4st Edition of TEMI2000_Series IM : Aug. 18. 2009 Page 21 / 55
4. FUNCTION & FIX OPEARTION setting
▶
Press [FUNCTION&FIX] button on MAIN MENU screen to enter into this function section.
▶
This screen is to set parameters concerned additional function for general operation and FIX operation.
4.1 Operation mode & Functions
①
Setup box to set Operation Mode. (PROGRAM / FIX Operation)
②
Setup box to set Power Stop Mode.
☞
Power Stop Mode is the function to set how to operate after power recovery from failure.
☞
STOP : Operation will stay STOP state after power recovery, and ‘OPERATION STOP’ will display.
☞
COLD : Same operation before power failure will re-start after recovery power recovery.
For FIX run state, operation will re-start from the beginning (of TIME OPERATION)
For PROG run state, operation will re-start from the first segment of processed pattern.
☞
HOT : Operation will resume from the running state right before power failure.
③
Setup box to set whether or not using FUZZY function. Refer to [4.2 FUZZY function]
☞
OFF : Not using FUZZY function.
☞
ON : Using FUZZY function.
④
Setup box to set SP SLOPE for ramping rate on FIX operation. Refer to [4.3 SP SLOPE function]
⑤
Setup box to set whether or not using TIME OPERATION for total process time on FIX Operation.
⑥
KEYLOCK button to prevent from any of unauthorized parameter setting. Every setting operation will
be denied if the
(KEY LOCk) button is currently being activated
☞
Screen transition and key unlock are still active.
①
②
③
④
⑤
⑥
[Image 4-1] Operation Settings Screen
