Samung DVG54R7200 Series, User Manual

Page: 52 / 128

Troubleshooting
English 52
Troubleshooting
Problem Action
Does not dry.
• Check all of the above, plus...
• Make sure the exhaust hood outside your home can open
and close freely.
• Check the exhaust system for lint buildup. Ducting should
be inspected and cleaned annually.
• Use a 4” rigid metal exhaust duct.
• Do not overload. 1 wash load = 1 dryer load.
• Dry heavy items and light weight items separately.
• Large, bulky items, such as blankets or comforters, may
require repositioning to ensure even drying.
• Make sure that your washer is draining properly and
extracting adequate water from the load.
• The load may be too small to tumble properly. Add a few
towels and restart the dryer.
• The load may be too large to tumble properly. Remove
some items and restart the dryer.
• Clean the lint filter.
Is noisy.
• Check the load for objects such as coins, loose buttons,
nails, etc. Remove promptly.
• It is normal to hear the dryer gas valve or heating element
cycle on and off during the drying cycle.
• Make sure the dryer is leveled properly as outlined in the
installation instructions.
• It is normal for the dryer to hum due to the high velocity of
air moving through the dryer drum, fan, or exhaust system.
Dries unevenly.
• Seams, pockets, and other similarly heavy areas may not
be completely dry when the rest of the load has reached
the selected dryness level. This is normal. You can choose
a higher dryness level or a cycle that involves a higher
dryness level.
• If one heavy item is dried with a light weight load, such as
one towel with sheets, it is possible that the heavy item
will not be completely dry when the rest of the load has
reached the selected dryness level.
• For the best drying results, dry heavy items and light
weight items separately.
Untitled-18 52 2020-07-14 3:40:13