Samung DVE50R5400W/A3, User Manual

Page: 36 / 120

Operations
English 36
Operations
03 Dryness
Press to select a dry level. You can select from 5
different options (Less to More). Please refer to following
recommendations to select the appropriate dryness.
• For larger or bulkier loads, select More for complete dryness.
• For items that needs to lay flat or hang to dry, use Less to
partially dry items.
NOTE
This option is not available with REFRESH , WRINKLE AWAY ,
STEAM SANITIZE , ACTIVEWEAR , TIME DRY , QUICK DRY , and AIR
FLUFF .
04 Temp.
Press to change the temperature of the current cycle. You can
select from 5 different options (Low to High). Please select the
appropriate temperature depending on the items in the load.
•
High : For sturdy cottons or those labeled Tumble Dry.
• Medium : For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Low : For heat sensitive items labeled Tumble Dry Low
or Tumble Dry Warm. Provides the lowest heated drying
temperature possible.
05 Time
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture
level of the load.
06 Wrinkle Prevent
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press
Wrinkle Prevent to activate this feature.
The load is dry, and can be removed at any time during the
Wrinkle Prevent cycle.
07 Eco Dry
This function is available with NORMAL and TIME DRY .
With the Eco Dry activated, drying takes a longer time but the
power consumption is reduced.
The drying time can be extended by up to 3 times depending on
the temperature and load. The Eco Dry function is enabled by
default.
Untitled-15 36 2019-01-16 2:22:40