Installation
English
28
Installation
STEP 6
Power on (for gas models)
Make sure all gas connections, the exhaust line, and all wiring is connected correctly. Then,
plug the power cord into a power source and check the dryer’s installation and operation
using the final checklist in Step 7 below.
STEP 7
Final check
When installation is complete, confirm that:
• The dryer is plugged into an electrical outlet and grounded properly.
• The exhaust ductwork is connected, and the joints are taped.
• You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct.
• The dryer is level and is sitting firmly on the floor.
• The dryer starts, runs, heats, and shuts off properly.
For gas models:
• The gas is supplied properly with no leaks (For gas models only).
CAUTION
The burner may not ignite initially due to air in the gas line. Allowing your dryer to
operate on a heat setting will purge the line. If the gas does not ignite within 5 minutes,
turn your dryer off and wait 5 minutes. Be sure the gas supply to your dryer has been
turned on. To confirm gas ignition, check the exhaust for heat.
Untitled-15 28
2019-01-16 2:22:33
Summary of Contents for DVE50R5400W/A3
Page 1: ...Dryer User manual DVE G 50R5400 DVE G 50R5200 Untitled 15 1 2019 01 16 2 22 20...
Page 59: ...Memo Untitled 15 59 2019 01 16 2 23 00...
Page 61: ...Secadora Manual del usuario DVE G 50R5400 DVE G 50R5200 Untitled 16 1 2019 01 16 2 24 58...
