manualshive.com logo in svg

Samsung XRN-2010, User Manual

Share
Download
Samsung XRN-2010 User Manual Download Page 38

Recovering RAID Array

1. 

If the number of HDDs for which the Faulty/Check indicator is displayed on the <

Status

> is identified, check 

the position of the HDD to be replaced on the HDD map.

2. 

Replace the malfunctioning HDD from the NVR with a new HDD.

3. 

After replacing the HDD, if the recovery popup appears, click on the <

OK

> button.

4. 

The <

Device

> - <

Storage Device

> - <

RAID

> menu will show the progress of recovery.

 

J

 

`

Replace it with the same model of HDD or an HDD of the same capacity from the same manufacturer.

 

`

A HDD used to build the RAID should be one of the recommended models.
If it's not possible to use the same model of HDD, then use the HDD with the same capacity from the same manufacturer 
should be used.

 

`

If you remove the power cord while using the RAID, it can damage it, so be careful. 
For reliable power, it is recommended you use the UPS.

 

`

A new HDD to be replaced should be one that is not RAID configured.

Use Joystick

The SPC-2000 joystick is operated as follows:

Name

Function

Up/Down/Left/Right

In PTZ mode, the camera can be panned, tilted, and controlled in 8 directions

The webviewer only supports the PTZ mode.

In Screen mode, the top/bottom/left/right tile can be selected.

Rotation

In PTZ mode, the screen is zoomed in when it is rotated clockwise and zoomed out when it is rotated 
counterclockwise.

b

1~8

In PTZ mode, presets number 1~8 are run.

Screen mode works as follows.

1: Changing live layout / 2: Search

3: Backup / 4: Zoom mode 

5: Freeze mode / 6: Audio 

7: Alarm / 8: Rec

c

9

It allows to exit PTZ mode in PTZ mode.

The webviewer won't be able to stop the PTZ on its own.

This is used to change to PTZ mode from screen mode.

10

It allows to exit PTZ mode in PTZ mode.

The webviewer won't be able to stop the PTZ on its own.

11, 12

In PTZ mode, Focus Near/Far operation is run.

When using the screen mode, the same operations can be done by moving the mouse.

 

M

 

`

More than one mapped lun should be available to connect to the initiator when using lun mapping.

b

c

38_

 

menu setup

menu setup

Summary of Contents for XRN-2010





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands