SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly
instructions
8-
4
This Document can not be used without Samsung's authorization
1) Be careful not to make scratch and molding damage!
2) Use 1.2 ± 0.2
Kgf.cm!
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
5
6
7
8
1) Screw up the FOLDER UPPER at the above
two points.(M1.4xL4)
1) Attach Screw rubber caps on the screws
by using a pincette.
1) Insert LCD FPCB[which is connected to
FOLDER] into the bottom of FRONT Hinge.
2) The FOLDER's projection inserts the
FRONT'S hole when Projection is pushed
3) Assemble FOLDER with FRONT
1) Attach FRONT Protection TAPE as a above
picture is shown.
Attach FRONT
Protection TAPE!