Samsung X10 Plus, User Manual

Page: 87 / 132

6-5
Chapter 6. Customizing your computer
■
Setting the User Password
You can configure user passwords so that other users can use the system.
On the ‘Set User Password’ item, press <Enter>, and complete step 3-4 of
Configuring the Supervisor Password.
■
Activating the Booting Password
Set the ‘Password on boot’ option to [Enabled].
From now on, you must enter the password to boot the system
■
Deactivating the Password
1. On the password to delete, press <Enter>. (e.g. supervisor password)
2. Enter the current configured password, and press <Enter>.
3. Leave the ‘New Password’ and ‘Confirm New Password’ field empty, and press
<Enter> to deactivate the password.
Before activating a user password, a supervisor password must have been config-
ured.
Users can start the system with their user password, but cannot enter into the
System Setup.
Deactivating the supervisor password also deactivates the user password.
N
N
o
o
t
t
e
e
Before activating the booting password, the supervisor password must have been
configured.
N
N
o
o
t
t
e
e