English - 31
03 CLEANING AND MAINT
AINING
The DRUM CLEAN Auto Alarm Function
•
If the “DRUM CLEAN” indicator on the display and the lamp
on the Cycle Selector are lit after a wash, it indicates that tub
(drum) cleaning is required. In this case, remove the laundry
from the washing machine, turn the power on, and clean the
drum by performing the DRUM CLEAN course.
•
If you do not perform the DRUM CLEAN course, the “DRUM
CLEAN” indicator on the display and the lamp on the Cycle
Selector are turned off. However, the “DRUM CLEAN”
indicator on the display and the lamp on the Cycle Selector
are turned on again after two washes are performed.
However, this will not result in a problem with the washing
machine.
•
Although generally, the DRUM CLEAN Auto Alarm appears
once a month or so, the frequency may differ depending on
the number of times the washing machine is used.
• In case of the alarm, please also clean the debris filter (refer to “Cleaning the debris
filter” section on page 32). Otherwise the performance of the bubble function may
lower down.
DRAINING THE WASHING MACHINE IN AN EMERGENCY
1.
Unplug the washing machine from the power supply.
2.
Open the filter cover by pressing down and pulling its
handle.
3.
Open the emergency drain cap by pulling it.
4.
Hold the cap on the end of the emergency drain tube and slowly pull it out.
5.
Allow all the water to flow into a bowl.
Remain water maybe more than you expected. Prepare
larger bowl.
6.
Reinsert the emergency drain cap and the drain tube.
7.
Replace the filter-cover.
Filter cover
Emergency
drain tube
Emergency
drain cap
WW85H5400EW-03409J_EN.indd 31
2014/3/14 14:37:37
