Removal and Reassembly _ 25
No.
Part name
Description
Figure
14
BUBBLE
PUMP AND
DRAIN PUMP
10.
Disconnect the terminal
of wires.
11.
Remove 3 screws as
photograph, then sep
-
erate pump drain and
replace it.
※
Check Points for Troubleshooting
1.
Separate the Drain Filter and check if any alien substances are
inside the pump (e.g. coins, buttons .., etc.) → Remove these if
found.
2.
Check if the wire driving the pump is has come loose → Take
the relevant countermeasure if necessary.
3.
When water leaks, check the assembly status of the Clamp
Hose, and Cap Drain → Take the relevant countermeasure if
necessary.
Turn the filter counterclockwise to remove the remaining water.
WW22K6800AW-A2.indb 25
2015/12/3 16:08:48
