14 _ Removal and Reassembly
3-2. STANDARD DISASSEMBLy DRAWINgS
► This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
No.
Part
Description
Figure
01
ASSY
COVER
TOP
1. Remove the two screws
holding the Top Cover at the
back of the unit.
2. Remove the top-cover by
lifting it up after pulling it back
about 15mm.
3. Then, the Water (Pressure)
Sensor, Noise Filter and
Water Valve can be replaced.
Water valve
Noise filter
Sensor pressure
WW22K6800AW-A2.indb 14
2015/12/3 16:08:31
